1:43 Diecast Model Cars
Precision in miniature: 1:43 die-cast models offer remarkable detail accuracy and premium finish – ideal for displaying, collecting, or giving as gifts. Click here to learn more about the 1:43 models and their fine detailing.
1:43 Diecast Model Cars
Koenigsegg Jesko, Die-Cast Model Car, 1:43
421438140€25.99
The Koenigsegg Jesko wears bright orange against black accents, with a large rear wing rising above its low body. On a display shelf, the contrasting colours draw attention to the roof and bonnet stripes. This die-cast metal miniature depicts the 2022 vehicle at 1:43 scale, preserving its proportions in a compact collector's format. Narrow, swept-back headlights give the front a sharply defined appearance. Orange side mirrors sit beside tinted windows, while black wheels and low-profile tyres complement the bodywork. The front splitter, side air intakes and pronounced diffuser give enthusiasts several aerodynamic details to examine up close. Viewed from the front quarter, the sporty rims and flat silhouette invite a closer comparison with the full-size hypercar. Its supercar shape offers a distinctive subject for a collection devoted to contemporary automotive design.
1:43 Diecast Model Cars
BMW E46 M3, Die-Cast Model Car, 1:43
421438312€25.99
Laguna Seca blue sets the BMW E46 M3 apart on the shelf, with the coupe body providing the familiar silhouette of the depicted vehicle. The finish invites a closer look at the shape from different angles. This die-cast metal replica represents the 2000 subject at 1:43 scale. Its size suits a collection arranged around a favourite marque or a particular period of motoring. Among other miniature automobiles, the blue coupe offers a specific colour and model-year reference for enthusiasts who enjoy comparing their chosen subjects.
1:43 Diecast Model Cars
BMW F90 M5 Competition, Die-Cast Car, 1:43
421438314€25.99
Signal green gives the BMW F90 M5 Competition a striking place in a collection of performance saloons. Viewed from the front corner, its sculpted bumper and detailed headlights invite a closer look at the 2022 subject. The die-cast metal model is reproduced at 1:43 scale, leaving room to display it alongside other miniatures. Door handles and side vent trim carry the exterior detailing along the flanks. A black roof and tinted glazing draw attention to the cabin above the vivid bodywork. Through the multi-spoke wheels, red brake calipers provide a small flash of contrasting colour. Collectors can appreciate the kidney grille and BMW M5 front plate marking in a front-facing display. A side view highlights the relationship between the wheels, mirrors and saloon silhouette.
1:43 Diecast Model Cars
BMW G80 M3, Die-Cast Model Car, 1:43
421438209€25.99
Metallic green bodywork sets off the black exterior accents of the BMW G80 M3, with sculpted lines worth studying in a side-on display. The 2023 subject is reproduced as a die-cast metal model at 1:43 scale. Black side mirrors pick up the darker trim, while tinted windows distinguish the cabin from the surrounding paintwork. Along the lower body, black side skirts underline the sports sedan's profile. A rear lip spoiler adds another detail to notice when the miniature is displayed at an angle. The front three-quarter view shows the kidney grille alongside the wheel design, offering collectors a view of both the nose and flank. On a shelf of automobile replicas, the green finish gives this saloon its own place among darker paint colours. The included contents are the model car and a manual.
1:43 Diecast Model Cars
BMW M5 Touring 2024, Die-Cast Model Car, 1:43
421438263€25.99
The BMW M5 Touring 2024 wears grey bodywork beneath a contrasting black roof, with its long estate profile visible from a front-quarter view. Dark windows echo the roof colour. This die-cast metal miniature depicts the car at 1:43 scale, making the contemporary Touring a compact subject for a collection. At the nose, the plate reads THE M5 TOURING beneath the grille and its M5 badge. Headlights and side mirrors give collectors further details to examine from different angles. Door handles and roof rails carry the detailing along the sides and over the roofline. Black multi-spoke wheels stand out against the paintwork, inviting a closer look at the car's stance. Displayed with its flank in view, the model lets enthusiasts appreciate the extended roof and estate proportions.
1:43 Diecast Model Cars
VW Golf VIII R, Die-Cast Model Car, 1:43
421438170€25.99
The black VW Golf VIII R wears its sporting details quietly, with a rear spoiler visible above the compact hatchback body. Viewed from the front, the grille badge and Golf plate identify the subject. This miniature depicts the 2022 version at 1:43 scale, offering a reduced-size view of the car's proportions for a collection shelf. Its die-cast metal body has a glossy finish that catches the light along the door outlines. Silver accents on the multi-spoke wheels stand out against the dark paintwork. The front headlights, mirrors and windshield wipers give enthusiasts several details to examine close up. A front-left viewing angle shows the nose and side together, while a rearward view draws attention to the roof spoiler. The model car comes with a manual.
1:43 Diecast Model Cars
Alpina B10 (E34) Biturbo, Die-Cast Car, 1:43
421438292€25.99
Orange bodywork makes the Alpina B10 (E34) Biturbo stand out on a collection shelf, with black side graphics tracing the sedan’s flanks. The die-cast metal model depicts the 1994 vehicle in 1:43 scale. Silver multi-spoke wheels offer a contrast worth viewing up close. At the nose, 4 round headlights sit above a front plate bearing ALPINA lettering. Black window trim, door handles and side mirrors add detail around the cabin. The rear spoiler extends the boot-line profile, while the front and side body kit emphasises the car’s sporting shape. Displayed at a three-quarter angle, this saloon replica lets collectors appreciate the exterior beyond its bright paint.
1:43 Diecast Model Cars
Aston Martin DB12, Die-Cast Model Car, 1:43
421438225€25.99
Green metallic bodywork contrasts with black roof detailing on the Aston Martin DB12, catching the light when displayed at an angle. The front three-quarter view reveals the sculpted hood and the coupe’s low stance. Made with a die-cast metal body, this 1:43 model represents the 2023 subject. A large grille with horizontal slats defines the nose, framed by slim headlights. Silver five-spoke wheels and low-profile tires give the side view further points to examine. Dark tinted windows complete the exterior, while hood vents reward a closer look from above. For a collection arranged by marque or model year, the DB12 offers a specific Aston Martin reference. Its contrasting finishes invite viewing from several angles on a display shelf. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Audi Avant RS 2, Die-Cast Model Car, 1:43
421438270€25.99
Polar silver gives the Audi Avant RS 2 a restrained appearance, with its performance character visible in the front bumper air intakes. The wagon body invites a closer look at a subject that pairs a long roof with sporty styling. This die-cast metal miniature is reproduced at 1:43 scale, a compact size for a marque-focused collection. Clear windows let light through the cabin glazing, while black roof rails trace the upper edges of the body. Viewed from the front, the rectangular headlights sit beside a grille bearing Audi rings and an RS badge. The front license plate reads Audi RS2. Silver side mirrors and 5-spoke wheels reward a look along the flank; red rear taillights add a contrasting accent at the back. On a display shelf, the estate profile offers a different silhouette beside coupe and saloon replicas. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Audi D3 S8 2010, Die-Cast Model Car, 1:43
421438211€25.99
A V10 badge on the front side panel is a detail worth seeking out on the Audi D3 S8 2010. The front plate reads AUDI S8, identifying the subject even in a head-on display. This die-cast metal model car depicts the sedan in dark blue at 1:43 scale. Tinted windows contrast with the silver surrounds, while a sunroof adds another detail to inspect from above. Viewed from a front corner, the grille and clear headlights show the shape of the nose. The multi-spoke wheels remain visible in a side-on arrangement, where collectors can also appreciate the 4-door body. On a shelf of miniature automobiles, this Audi invites a closer look at the understated exterior of a performance sedan. A manual is included with the model car.
1:43 Diecast Model Cars
Audi S2 Coupe, Die-Cast Model Car, 1:43
421437190€25.99
The red Audi S2 Coupe wears its rear spoiler above the tail lights, a distinctive silhouette to enjoy on a display shelf. Its 1993 body shape gives an automobile collection a specific early-1990s subject. At 1:43, the die-cast metal miniature invites a close look at the exterior from several angles. Black window frames outline the glazing, while side mirrors and a roof antenna add details above the lower body trim. Silver multi-spoke wheels offer another point of interest in a side-on view, with Audi markings visible at their centres. At the nose, the grille badge sits between rectangular headlights, with indicator and fog light sections below. The rear window carries horizontal defroster lines, a detail best appreciated when the replica is viewed from behind. Front windshield wipers and the small side badge near the front wheel give enthusiasts more to examine beyond the main body lines. A cabinet position that reveals the coupe's profile lets its compact proportions stand out among other scale replicas.
1:43 Diecast Model Cars
BMW G80 M3 Sedan, Die-Cast Model Car, 1:43
421438277€25.99
Sao Paulo yellow picks out the BMW G80 M3 Sedan's sculpted body lines, making the contours worth studying from a front three-quarter angle. Black side skirts and rear spoiler details underline the performance sedan's styling. This die-cast metal miniature depicts the 2023 vehicle at 1:43 scale. Tinted windows give the glazing a dark finish, while door handles and side fender trim add detail along the flanks. A BMW roundel on the hood identifies the marque above the front grille. On a display shelf, the replica invites a closer examination of the full-size car's exterior, from its bumper shapes to its contrasting wheel finishes.
1:43 Diecast Model Cars
BMW G82 M4 Competition, Die-Cast Car, 1:43
421438244€25.99
The tall kidney grille gives this red BMW G82 M4 Competition a recognisable face, especially when displayed at a front three-quarter angle. Slim headlights frame the nose, inviting a closer look at the 2023 subject. The die-cast metal body is reproduced in 1:43 scale, a compact format for a shelf of automobile miniatures. Glossy dark red paint catches the light across the bonnet and flanks. A black roof and matching side mirrors stand out against that finish, while tinted windows darken the cabin outline. Multi-spoke wheels carry the black accents down to the tyres. Side skirts emphasise the lower edge of the 2-door coupe, and the rear spoiler adds another feature to examine from behind. Collectors can display the miniature side-on to appreciate its silhouette or angle it towards the room to show the grille. The included contents are the model car and a manual.
1:43 Diecast Model Cars
BMW G90 M5 Sedan, Die-Cast Model Car, 1:43
421438286€25.99
Marina Bay blue highlights the BMW G90 M5 Sedan's body contours, making a front three-quarter view worth a place in the cabinet. This die-cast metal replica depicts the 2024 vehicle at 1:43 scale. From the side, the black multi-spoke wheels invite a closer look at their pattern. The roof and mirrors carry the same dark colour, while tinted glazing adds another contrast above the bodywork. At the nose, detailed headlights sit beside the large BMW kidney grille, with THE M5 lettering visible below. A charging flap on the front-left fender adds a specific exterior detail of the depicted vehicle. Collectors can display the saloon at an angle that shows both its front styling and its side profile.
1:43 Diecast Model Cars
BMW G90 M5 Sedan, Die-Cast Model Car, 1:43
421438287€25.99
Fire orange III makes the BMW G90 M5 Sedan stand out on a collector’s shelf, with dark accents framing the orange bodywork. The depicted 2024 vehicle offers a contemporary subject for a collection of performance sedans. This die-cast metal replica is presented at 1:43 scale. Viewed from the front, the headlights and kidney grille invite a closer look at the car’s face. The front bumper adds another feature to examine from a three-quarter angle. Along the side, a visible flap on the front-left fender provides a specific detail of the depicted vehicle. The black roof, mirrors and multi-spoke wheels reward viewing the miniature from above and beside it. Enthusiasts can appreciate the saloon’s exterior as a display piece among their automotive favourites.
1:43 Diecast Model Cars
BMW G99, Die-Cast Model Car, 1:43
421438304€25.99
The BMW G99 wears metallic green with a black roof, a contrast that stands out in a front-three-quarter display. Its estate silhouette gives the miniature a different profile beside saloon replicas. This die-cast metal representation depicts the 2024 vehicle at 1:43 scale. Dark tinted windows complement the side mirrors, while silver-and-black multi-spoke wheels reward a closer look at the flanks. The front grille and headlights are visible beneath the bonnet line. A charging flap on the front-left fender adds a specific exterior detail to the bodywork. The front plate reads “THE M5 TOURING”, a finishing touch to notice when viewing the nose. On a collection shelf, the long roofline invites comparison with other automotive body styles.
1:43 Diecast Model Cars
Brabus Rocket 900, Die-Cast Model Car, 1:43
421438299€25.99
China blue panels and black hood detailing give the Brabus Rocket 900 a striking contrast when viewed from the front corner. The die-cast metal miniature depicts the 2021 subject at 1:43 scale. Its boxy silhouette offers collectors a different shape beside lower-bodied automobiles on a display shelf. Tinted windows darken the cabin area, with black side mirrors continuing the contrast along the doors. Side steps run beneath the body, and a roof rack adds detail above it. Red accents at the front splitter corners and on the roof accessory reward a closer look beyond the main paint finish. The wheel design invites inspection from the side, where the coloured rings stand out against the dark spokes. Displayed at an angle, the replica lets the grille emblem, round headlights and hood scoop remain visible together.
1:43 Diecast Model Cars
Citroën CX GTI Turbo II, Die-Cast Car, 1:43
421438300€25.99
The silver Citroën grille emblem stands out against the Noir Onyx finish of the Citroën CX GTI Turbo II. Its long body invites a closer look from the front corner, where clear headlights frame the nose. Depicting the 1989 vehicle at 1:43 scale, this die-cast metal model offers collectors a compact replica of the named subject. Amber indicators and silver wheel covers add contrasting accents along the black exterior. The front plate reads CX 25 GTI TURBO 2, while a TURBO marking sits near the front wheel. Side mirrors, a windshield wiper and a roof antenna reward inspection beyond the body shape. On a shelf of French automobile miniatures, the glossy silhouette offers room for a collection focused on Citroën.
1:43 Diecast Model Cars
Dodge Challenger SRT Hellcat, Die-Cast Car, 1:43
421438285€25.99
White paintwork sets off the graphic elements on the Dodge Challenger SRT Hellcat, making its muscular outline worth a closer look on display. The broad stance suits a subject rooted in American V8 tradition. This die-cast metal miniature depicts the 2020 Widebody Custom in Redeye Knuckle form at 1:43 scale. Authentic proportions preserve the relationship between the wide body and the striking front end. Sporty rims add another point of interest when viewed from the side. Clearly elaborated design elements invite collectors to examine the performance coupe beyond its overall silhouette. Among other automobile replicas, the Hellcat offers a distinctly muscle-car subject for a collection arranged around road-car design.
1:43 Diecast Model Cars
Ford Focus MKII RS 2010, Die-Cast Car, 1:43
421438223€25.99
Blue bodywork and white wheels give the Ford Focus MKII RS 2010 a striking contrast on the display shelf. Its 3-door hatchback shape rewards a side-on view, where the wide styling and RS badge near the front wheel are visible. The die-cast metal model is reproduced at 1:43 scale, with the sporty exterior condensed into a compact replica. Across the nose, front fog lights flank the grille, while the front plate carries the FOCUS RS lettering. Hood vents add another detail to inspect from above. A large black rear spoiler defines the back of the car, and the dark mirrors and tinted glazing echo its colour. Collectors can display the miniature facing forward to show the front-end treatment or at an angle to reveal the wheel spokes. The blue hatchback offers a distinct subject for a collection centred on road cars with performance styling.
1:43 Diecast Model Cars
Ford Focus MKII RS, Die-Cast Model Car, 1:43
421438222€25.99
The green Ford Focus MKII RS captures attention with its black front grille and hood vents, details worth examining from the front. Depicting the 2010 vehicle, this die-cast metal miniature offers collectors a hatchback subject with a distinctly sporting appearance. At 1:43 scale, it fits a compact display while retaining the exterior features that identify the depicted car. Tinted windows lend contrast to the bright bodywork. Side skirts follow the lower edges of the body, where the widened arches frame silver multi-spoke wheels. The front plate reads “FOCUS RS,” and an “RS” badge appears on the side. A front-left display angle reveals the sculpted bumper and the profile together. Seen from the rear, the large black spoiler is a detail to pause over. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Ford Mustang GTD, Die-Cast Model Car, 1:43
421438288€25.99
Black hood and fender vents stand out against the Indulgent blue finish of the Ford Mustang GTD, capturing its race-inspired appearance. Viewed from the front corner, the low stance and broad bodywork give the miniature a purposeful outline. This die-cast metal model depicts the 2025 vehicle at 1:43 scale. Black multi-spoke wheels reveal red brake calipers, a detail worth noticing when examining the car at close range. Dark tinted windows continue the contrast across the cabin. On a display shelf, the rear wing gives enthusiasts a reason to show the car from an angle that reveals its silhouette. The front splitter and side skirts reward a view nearer shelf level, where the aerodynamic shaping is easier to appreciate.
1:43 Diecast Model Cars
Ford Mustang GTD, Die-Cast Model Car, 1:43
421438289€25.99
A black hood with a red center stripe gives the Ford Mustang GTD a striking contrast when displayed nose-first. Molten Magenta red follows the broad fenders of the depicted 2025 vehicle. The metallic tri-coat finish rewards a closer look under changing light. Its die-cast metal body captures the coupe’s sculpted shape, while hood vents add detail to the view from above. Tinted windows sit beneath the roofline, and aerodynamic side air intakes are visible along the flanks. A small Ford logo appears near the windshield. At 1:43 scale, the model offers collectors a compact interpretation of this Mustang. The silver multi-spoke wheels invite inspection from a low angle, where the front splitter and side skirts are also visible. A rear-facing position on the display shelf puts the large black wing in view.
1:43 Diecast Model Cars
Honda Civic Type R, Die-Cast Model Car, 1:43
421438316€25.99
The Honda Civic Type R wears Rallye red, with a rear wing that stands above the roofline in a three-quarter display view. Its 2022 hatchback shape offers collectors a contemporary subject for the shelf. The die-cast metal body is reproduced at 1:43 scale. A Honda badge sits on the black front grille, while a hood vent adds another feature to inspect from above. Tinted windows reveal red seats inside the cabin. Black multi-spoke wheels and side skirts contrast with the glossy finish. Aerodynamic elements around the front bumper reward a closer look at the nose. Displayed at an angle, the model lets enthusiasts appreciate the front fascia and side profile together.
1:43 Diecast Model Cars
MB 560 SEC AMG, Die-Cast Model Car, 1:43
421438275€25.99
Linarite blue sweeps across the widebody shape of the MB 560 SEC AMG, depicting the 1990 subject with a broad, low stance. On a display shelf, the widened bodywork invites a closer look at the coupe’s proportions. The die-cast metal model is rendered at 1:43, a compact format for a vehicle collection. A silver Mercedes star stands at the center of the grille, framed by clear front headlights. Blue side mirrors continue the color along the flanks, while dark tinted windows contrast with the surrounding finish. The wheels have blue centers bordered by silver rims. A small rear spoiler adds another detail to examine when the replica is viewed from behind. Collectors can present the coupe at an angle to show its front detailing and widebody silhouette together.
1:43 Diecast Model Cars
Mercedes-Benz W124 E60 AMG, Die-Cast Car, 1:43
421438301€25.99
Signal red frames the silver grille and hood ornament of the Mercedes-Benz W124 E60 AMG, a striking view for a display shelf. The dark windows contrast with the body, while silver 5-spoke wheels underline the sedan’s sporty stance. Depicting the 1994 vehicle at 1:43, this die-cast metal model rewards a closer look at the exterior. Clear headlights flank the front grille, and body-colored mirrors follow the sides. The front plate carries the E60 AMG name, a detail visible when the replica faces outward in a cabinet. For a collection centered on Mercedes-Benz, the W124 silhouette offers a recognizable subject to study from several angles.
1:43 Diecast Model Cars
Mini Cooper John Works, Die-Cast Model Car, 1:43
421438208€25.99
The metallic green Mini Cooper John Works wears hood stripes and a contrasting roof, a combination worth viewing from above in a collection display. Depicting the 2023 vehicle, this die-cast metal miniature captures its compact hatchback proportions at 1:43 scale. A hood scoop adds another feature to examine across the front of the body. The sporty bumper frames the grille, where a red accent breaks up the darker trim. Along the sides, dark tinted windows sit above black multi-spoke wheels. Rounded headlights give the nose its recognisable shape. A front three-quarter view on the shelf lets collectors appreciate the bonnet, front fascia and short body together. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Mini Cooper S 1994, Die-Cast Model Car, 1:43
421438243€25.99
White stripes run across the blue hood of the Mini Cooper S 1994, a detail worth showing from a front-quarter angle. The white roof remains visible above the bodywork when the model sits on a display shelf. Additional rally-style lights give the nose a recognisable appearance for a collection centred on sporty road cars. Chrome-style finishes pick out the grille and bumper, while silver mirrors and wheels reward a closer look along the sides. The front plate reads MINI COOPER. Made with a die-cast metal body at 1:43 scale, this replica lends itself to a compact collection of automotive subjects. Its contrasting paintwork invites comparison with other colour schemes in a collector's cabinet. A model car and manual are included.
1:43 Diecast Model Cars
Mini Cooper, Die-Cast Model Car, 1:43
421438306€25.99
A red roof above Island blue metallic paint gives this Mini Cooper a striking contrast when viewed on a display shelf. The miniature depicts the 2023 John Cooper Works version, with sporty front grille and bumper detailing in black and red. Its die-cast metal body is reproduced at 1:43 scale. Dark-tinted windows sit within black surrounds, while the front plate carries the MINI lettering. Across the bonnet, outlined stripes draw attention to the hood scoop and invite a closer inspection of the front-end styling. Silver accents catch the light on the black wheels, framed by wheel arch cladding. For a collector arranging a line of hatchbacks, the blue body and red accents offer a distinct colour pairing to place beside other motoring subjects.
1:43 Diecast Model Cars
Nissan Skyline GT-R (R34), Die-Cast Car, 1:43
421438282€25.99
Midnight purple covers the Nissan Skyline GT-R (R34), giving the Z-Tune version a dark finish worth a closer look in a showcase. The named subject lets an enthusiast select a specific Skyline variant rather than a generic sports car. Depicting a 1999 vehicle, this miniature offers a dated reference for a collection arranged around automotive eras. Its die-cast metal body reproduces the subject at 1:43 scale. A desk display gives this Japanese automotive subject a place beside motoring books, while a cabinet invites comparison with other replicas.
1:43 Diecast Model Cars
Nissan Skyline GT-R (R34), Die-Cast Car, 1:43
421438283€25.99
Bayside blue puts the Nissan Skyline GT-R (R34) bodywork in the spotlight, inviting a closer look on a collector’s shelf. This Z-Tune rendition offers a specific subject for a collection devoted to Japanese performance coupes. The die-cast metal construction is a defining physical detail of the miniature. Reproduced at 1:43 scale, it leaves room for a display of several automotive subjects within a modest space. The depicted vehicle is identified with the year 1998. A cabinet dedicated to tuner styling gives this blue replica a fitting setting.
1:43 Diecast Model Cars
Porsche 911 GT3 RS, Die-Cast Model Car, 1:43
421438273€25.99
An oversized rear wing rises above the Riviera blue Porsche 911 GT3 RS, giving the model its unmistakable silhouette on a collector’s shelf. Yellow accents pick out the mirrors, lower side stripe and wing endplates against the blue bodywork. Depicting the Bergmeister Tribute, 2023, this die-cast metal replica is presented at 1:43 scale. Hood vents and a front splitter reward a closer look at the nose. Side skirts and rear fender air intakes carry the aerodynamic detailing along the flanks. Large multi-spoke wheels sit beneath the broad arches, while black trim outlines the lower body. The GT3 RS lettering on the side identifies the subject even when viewed in profile. Displayed at an angle, the miniature offers a view of both the sculpted front end and the towering rear wing.
1:43 Diecast Model Cars
Porsche 964 RS 3.8 1994, Model Car, 1:43
421438255€25.99
A large rear wing rises above the red Porsche 964 RS 3.8 1994, giving the coupe a distinctive silhouette when viewed from behind. Round headlights frame the front, while the Porsche crest on the hood rewards a closer look. This die-cast metal model car reproduces the subject at 1:43 scale. Silver deep-dish wheels stand out beneath the bodywork, and black trim outlines the windows. Through the glazing, the cabin adds another detail to examine beyond the exterior. Side mirrors and a visible door handle carry the detailing along the flank. The front plate area bears the Porsche name. Displayed at a three-quarter angle, the replica lets enthusiasts take in the nose, side profile and raised spoiler in a single view. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Porsche 964 RS 3.8, Die-Cast Model Car, 1:43
421438256€25.99
The white Porsche 964 RS 3.8 puts the body shape at the centre of a shelf display. Its pale finish offers a restrained backdrop for the exterior contours. Depicting the 1994 vehicle, this die-cast metal model gives collectors a specific subject to place within a Porsche collection. At 1:43, it lends itself to a compact arrangement of automotive miniatures. A display organised by marque or year offers a setting for this replica, while a cabinet of matching-scale automobiles invites comparison of their proportions. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Porsche 964 RS, Die-Cast Model Car, 1:43
421438248€25.99
A black Carrera stripe runs along the silver Porsche 964 RS, a detail that catches the eye when the miniature is displayed side-on. The model depicts the 1994 subject in 1:43 scale. Its die-cast metal body reproduces the coupe's rounded shape, while bumper lights add detail beneath the headlights. Silver mirrors sit beside dark side windows, through which the interior seats can be seen. Five-spoke wheels invite a closer look at the car from a low angle. On a display shelf, the hood crest and black window trim reward inspection from different viewpoints. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Porsche 992 GT3, Die-Cast Model Car, 1:43
421438259€25.99
The rear wing rises above the yellow Porsche 992 GT3, making its shape recognisable even among other miniatures on a display shelf. Depicting the 2023 vehicle, this die-cast metal model gives collectors a compact view of the coupe’s body lines at 1:43 scale. Dark tinted windows contrast with the surrounding paintwork. The headlights and GT3 lettering on the front plate reward a closer look at the nose. Viewed from a low angle, the front splitter and side skirts emphasise how close the body sits to the wheels. A front three-quarter display position reveals the black roof, side mirrors and grey multi-spoke rims in a single view.
1:43 Diecast Model Cars
Porsche 992 GT3RS 2023, Die-Cast Car, 1:43
421438237€25.99
Green wheels stand out beneath the white body of the Porsche 992 GT3RS 2023, a striking contrast for a collector’s shelf. The black hood and roof give the coupe a darker upper outline, with matching mirror accents extending the colour theme. Rendered in die-cast metal at 1:43 scale, the miniature invites close inspection of the depicted vehicle. A large rear wing rises above the tail, while widened fenders frame its low stance. Hood vents, side air intakes and a front splitter provide further details to examine from the front and side. The GT3 RS lettering identifies the flanks, and a Porsche crest marks the hood. Displayed at an angle, the replica lets collectors appreciate the side aero elements alongside the rear spoiler.
1:43 Diecast Model Cars
Porsche 992 GT3RS, Die-Cast Model Car, 1:43
421438238€25.99
Black hood and fender vents give the Porsche 992 GT3RS a distinctive appearance that rewards a closer look in a display cabinet. The front splitter sits low beneath the nose, emphasizing the shape of the sports car when viewed from the front. Depicting the 2023 vehicle, this die-cast metal miniature reproduces the subject at 1:43 scale. GT3 RS lettering along the side adds another recognizable detail for enthusiasts examining the profile. The rear wing and red wheel accents invite viewing from different angles, whether the model stands alone or among a collection of performance cars. A model car and manual are included.
1:43 Diecast Model Cars
Renault Clio V6 PH.2, Die-Cast Model Car, 1:43
421438281€25.99
Yellow paint sets off the Renault Clio V6 PH.2's black front grille, making the nose worth a closer look on a display shelf. Large silver wheels contrast with the dark windows. The lower front intake and square fog light housings add further detail to the front bumper. Depicting the 2003 vehicle, this die-cast metal model is presented at 1:43 scale. Its side vents sit near the rear wheel area, a detail that rewards viewing the replica from an angle. For a collection centred on Renault, the miniature offers a specific subject to examine beside other automotive designs.
1:43 Diecast Model Cars
Renault Clio V6 PH.2, Die-Cast Model, 1:43
421438280€25.99
Blue Iliade sets the Renault Clio V6 PH.2 apart on the display shelf, with its colour drawing attention to the compact sporting shape. This miniature depicts the 2003 vehicle in die-cast metal. Its 1:43 scale offers a compact representation of the named Renault for a marque-focused collection. A display devoted to early-2000s automobiles gives this replica a fitting setting. Beside other Clio versions, it invites a closer look at how the V6 PH.2 differs in appearance.
1:43 Diecast Model Cars
Shelby Mustang GT500, Die-Cast Model Car, 1:43
421438293€25.99
The Shelby Mustang GT500 wears metallic green with white stripes, a contrast that rewards a closer look on the display shelf. Depicting the 2020 Eruption version, this miniature captures the coupe's racing-inspired appearance in die-cast metal. At 1:43 scale, it leaves room for a collection of different vehicle shapes and eras. Hood vents add detail to the view from above. Cobra emblems on the grille and side fender give enthusiasts another feature to inspect. Tinted windows and black side mirrors continue the dark accents around the cabin. A front three-quarter display angle shows the grille and splitter alongside the multi-spoke wheels. Viewed from the rear quarter, the large spoiler gives the Shelby Mustang GT500 a different profile to appreciate.
1:43 Diecast Model Cars
Toyota Corolla GR, Die-Cast Model Car, 1:43
421438204€25.99
A large rear spoiler rises above the red Toyota Corolla GR, giving this Circuit Edition a distinctive silhouette on the display shelf. Seen from the front corner, the hood vents pick up the performance-inspired styling of the 2023 subject. The die-cast metal body has a glossy dark red finish that catches the light across the sculpted panels. Flared fenders frame the wheels, while side skirts trace the lower edges of the hatchback. Black side mirrors echo the roof, carrying the contrasting colour along the sides. At 1:43, the replica invites a close inspection of the Toyota emblem and GR badge on the front grille. A side-on display reveals the body shaping; an angled position favours the nose and black multi-spoke wheels. Collectors can give this compact Toyota a place among contemporary road-car miniatures.
1:43 Diecast Model Cars
Toyota GR86 Pandem, Die-Cast Model Car, 1:43
421438284€25.99
Red bodywork contrasts with black exterior details on the 2022 Toyota GR86 Pandem, a miniature with a low stance and pronounced tuning styling. Viewed from a front three-quarter angle, the broad nose and widened body give collectors plenty to examine. The die-cast metal model is reproduced at 1:43 scale. Dark tinted windows give the cabin a shaded appearance, while black side mirrors stand out against the surrounding red panels. Low-profile tires leave the multi-spoke wheel pattern clearly visible. The exposed intercooler adds a mechanical detail at the front of the coupe, beneath the bonnet line. A side-on display highlights the deep skirts and the rear wing rising above the body. Among a shelf of road-car replicas, this modified subject offers a distinctly motorsport-inspired silhouette.
1:43 Diecast Model Cars
Toyota Supra MK.4, Die-Cast Model Car, 1:43
421438305€25.99
A large rear wing rises above the Toyota Supra MK.4, making its custom profile stand out on a display shelf. The low body kit invites a closer look at the front bumper and side contours. This die-cast metal replica depicts the 2001 subject at 1:43 scale. Black multi-spoke wheels have silver rims that catch the eye beneath the bodywork. Low-profile tires complete the wheel detailing. A black hood and dark tinted windows suit the modified appearance, while the side air intake adds another feature to examine. Detailed headlights, side mirrors and the front grille opening reward a front three-quarter view. For a collection of Japanese coupes, the Toyota Supra MK.4 offers a tuning-themed subject to place beside other automotive miniatures.
1:43 Diecast Model Cars
Volkswagen Golf MKI, Die-Cast Model Car, 1:43
421438226€25.99
The red Volkswagen Golf MKI wears its Sportline convertible styling with the roof folded back, leaving the cabin visible on the shelf. Depicting the 1992 vehicle, this die-cast metal model invites a closer look from above as well as from the front. The black interior sits beneath a roll bar that stands out against the body colour. Side trim carries the dark contrast along the flanks, while the mirrors match the paintwork. Silver edges pick out the multi-spoke wheels, a detail worth viewing from a low angle. Across the nose, 4 round headlights frame the black grille and the GOLF CABRIO front plate. At 1:43 scale, the replica suits a Volkswagen collection where enthusiasts can compare the shapes of different generations. Its open cabin offers an additional view of the car when displayed beside closed-roof automobiles.
1:43 Diecast Model Cars
VW Golf Cabriolet MK1 Classic Line, Model, 1:43
421438317€25.99
The VW Golf Cabriolet MK1 Classic Line wears its roof down, with the roll bar outlining the cabin against the dark green bodywork. Depicting the 1992 car, this miniature invites a closer look at a familiar open-top Golf. The die-cast metal construction gives the replica its shaped body, while the 1:43 scale suits a collection of compact vehicle models. Beige seats are exposed inside, and the folded soft top rests behind the passenger compartment. At the front, round headlights flank the black grille above a plate bearing the Golf Cabrio name. Silver rims and the side's Classic badge reward inspection from another angle. On a display shelf, the cabriolet offers a view into the interior as well as a profile of its distinctive roof-down shape.
1:43 Diecast Model Cars
VW Golf IV R32, Die-Cast Model Car, 1:43
421438274€25.99
Toronto red sets off the VW Golf IV R32's rounded headlights and sporty front bumper, inviting a closer look at the nose. The grille carries the Volkswagen logo and R32 badge, while the front plate reads Golf “R32”. Depicting the 2003 vehicle, this die-cast metal miniature captures the hatchback's familiar shape at 1:43 scale. A front-quarter view on the shelf reveals the door contours and silver multi-spoke wheels against the glossy bodywork. Dark tinted windows frame the cabin, with black windshield wipers visible at the base of the windscreen. Side mirrors and a small roof antenna add details worth noticing beyond the front fascia. For a collection centred on compact performance automobiles, the 3-door outline offers a distinctive subject to display.
1:43 Diecast Model Cars
VW Golf MKIII VR6, Die-Cast Model Car, 1:43
421438264€25.99
The green VW Golf MKIII VR6 wears its grille badge up front, a detail worth a closer look in a collection. Depicting the 1994 vehicle, this miniature captures the hatchback's body lines in die-cast metal. The 1:43 scale leaves room to display it among other automotive replicas. Black bumpers and side trim frame the paintwork, while silver alloy-style wheels stand out beneath the body. Through the clear glazing, the seats and dashboard offer a view into the cabin. Side mirrors and the front and rear lighting add details to examine from different angles. The Volkswagen logo and Golf lettering identify the subject beyond its silhouette. On a collector's shelf, the 3-door shape invites a comparison with other generations of the marque.
1:43 Diecast Model Cars
VW Golf MKIII VR6, Die-Cast Model Car, 1:43
421438265€25.99
The VR6 badge on the front grille and Golf lettering on the front plate identify this purple VW Golf MKIII VR6 at a glance. Its 3-door hatchback shape depicts the 1994 car, with the short rear body visible in a side-on display. The die-cast metal miniature is reproduced at 1:43, a format that leaves room for a collection of different automotive subjects. Black bumpers and side trim outline the aubergine bodywork, while silver multi-spoke wheels provide a contrasting finish below. Transparent windows reveal the seating inside, so the cabin can be inspected as well as the exterior. Headlights and front fog lights give enthusiasts details to examine in a front-facing arrangement. A three-quarter view also shows the side mirrors and wheel pattern, inviting a closer look at this replica of the named VR6 variant. The included contents are the model car and a manual.
1:43 Diecast Model Cars
VW Golf R 333, Die-Cast Model Car, 1:43
421438272€25.99
Lime yellow paint makes the VW Golf R 333 easy to pick out on a shelf, with a black roof outlining its contrasting upper section. The 2023 subject is presented as a limited-edition die-cast metal model at 1:43 scale. Viewed from the front-left corner, the grille and detailed headlights offer a closer look at the Golf's nose. Multi-spoke wheels and dark lower side trim carry the black accents along the body. Tinted windows complement the exterior finish, while the rear spoiler gives the hatchback its sporty outline. A visible 333 graphic on the lower side marks the named variant and rewards inspection from a side-on angle. For a collector arranging a display around different Golf variants, the yellow finish offers a distinctive colour to place among them. The included contents are the model car and a manual.
1:43 Diecast Model Cars
VW Golf Rally MKII, Die-Cast Model Car, 1:43
421438290€25.99
The VW Golf Rally MKII wears black paint, with a RALLYE GOLF front plate that rewards a closer look on the display shelf. Its grille and detailed front bumper give the nose plenty to examine in a front-facing view. Depicting the 1989 subject, this die-cast metal replica is made at 1:43 scale. A front-quarter view shows the rectangular headlights and orange bumper indicators alongside the silver multi-spoke wheels. Clear glazing lets light through the windows, while windshield wipers remain visible at the base of the windscreen. Side mirrors and a roof antenna trace the outline of the 2-door hatchback. For a collector's showcase, the compact Golf invites inspection from the nose to the roofline, with its glossy finish catching the light.
1:43 Diecast Model Cars
VW Golf Rally, Die-Cast Model Car, 1:43
421438020€25.99
The VW Golf Rally wears dark metallic green paint, with a RALLYE GOLF front plate that rewards a closer look on the display shelf. Depicting the 1989 vehicle, this die-cast metal replica captures the hatchback’s compact outline in 1:43 scale. Clear window glazing reveals the interior seats, offering another detail to examine beyond the bodywork. A side mirror and rear roof antenna add to the silhouette when the miniature is viewed at an angle. The square headlights, black grille and bumper air intakes are especially visible in a front three-quarter view. Silver multi-spoke wheels give enthusiasts a reason to inspect the automobile from the side as well. Among a collection of period subjects, the green Golf invites comparisons of body shapes and styling details.
1:43 Diecast Model Cars
Alpina B10 (E34), Die-Cast Model Car, 1:43
421437770soon available again
Blue stripes trace the white Alpina B10 (E34), with the front lip and side graphics catching the eye in a display cabinet. Viewed from the front, twin round headlights flank the kidney grille. This die-cast metal miniature depicts the 1994 vehicle at 1:43 scale. Black window trim, door handles and lower body cladding contrast with the pale paintwork, while side mirrors complete the exterior. Silver multi-spoke wheels reward inspection from the side; a large rear spoiler is visible above the boot. A three-quarter position on the shelf lets collectors appreciate the nose and the decorated flanks together. The sedan's sporting appearance offers a distinct subject for an automobile collection. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Audi RS6-R, Die-Cast Model Car, 1:43
421438269soon available again
Olive green paint sets off the Audi RS6-R's large black front grille, with the Audi rings visible above the sporty splitter. The front plate area carries the ABT name, a detail to notice when viewing the replica head-on. This die-cast metal model depicts the performance estate in 1:43 scale. Tinted windows frame the cabin, while black side skirts run along the lower body. Roof rails and matching mirrors continue the dark exterior accents. Multi-spoke wheels expose red brake calipers beneath the flared styling. A front three-quarter view on the shelf lets collectors appreciate the grille, wheel design and long estate profile together. The included contents are the model car and a manual.
1:43 Diecast Model Cars
BMW E36 Coupe M3, Die-Cast Model Car, 1:43
421438268soon available again
The yellow BMW E36 Coupe M3 catches the eye in a front three-quarter view, where its body lines and mirrors invite a closer look. Die-cast metal gives the miniature a material finish collectors can appreciate alongside the sculpted exterior. This 1:43 representation depicts the 1999 vehicle, with the proportions of its 2-door body retained for shelf display. The front plate reads BMW M3, a small marking that rewards close inspection. Tinted windows reveal a dark interior and lend the glazing a different appearance from the clear headlights. On a display shelf, the coupe offers enthusiasts a familiar BMW subject to examine from several angles. A collection arranged by marque or model year gives this yellow example a fitting place.
1:43 Diecast Model Cars
Citroën BX Sport, Die-Cast Model Car, 1:43
421438307soon available again
The Blanc Meije finish sets off the Citroën BX Sport's angular body kit, a distinctly 1980s shape to examine on a display shelf. Depicting the 1985 vehicle, this die-cast metal miniature invites a closer look at the styling of the sporting hatchback. Across the front, clear rectangular headlight lenses sit beside orange indicators, with fog lights lower down in the bumper. Vents punctuate the nose beneath the Citroën chevron, while the front plate carries the BX SPORT lettering. Along the sides, graphics and black trim contrast with the white body, and slats pick out the rear quarter panels. Silver wheels sit beneath the sculpted bodywork, with tinted glazing above. The rear spoiler gives the tail its sporting outline, complemented by black mirrors and an antenna on the roof. At 1:43, the replica offers collectors a compact example of the named marque for a collection of period automobiles. A front three-quarter display angle reveals the nose and side treatment together, rewarding a look beyond the familiar silhouette.
1:43 Diecast Model Cars
Honda Civic Type R, Die-Cast Model Car, 1:43
421438100soon available again
The rear wing rises above the blue Honda Civic Type R, making its silhouette recognisable on a display shelf. Viewed from the front, slim headlights and a hood vent give the miniature a distinctly purposeful face. The grille carries the Honda badge and Type R emblem, while the front plate area reads CIVIC TYPE R. Its die-cast metal body depicts the 2022 vehicle at 1:43 scale. Black aerodynamic trim traces the lower edges of the hatchback, inviting a closer look at its shape from different angles. Red brake calipers stand out behind the dark wheels when the replica is positioned side-on. Collectors can place this interpretation among contemporary performance automobiles or give its contrasting bodywork a shelf of its own. The included contents are the model car and a manual.
1:43 Diecast Model Cars
Mercedes AMG G63, Die-Cast Model Car, 1:43
421438250soon available again
The Mercedes AMG G63 wears glossy black bodywork, with AMG lettering on the front plate area adding a detail worth a closer look. Its die-cast metal construction gives collectors a miniature of the 2022 vehicle at 1:43 scale. A front three-quarter view reveals the Mercedes star between the round headlights. The vertical-slat grille stands out against the dark finish. Along the sides, V8 BITURBO markings sit on the front panels, while tinted windows contrast with the outlined doors. Black multi-spoke wheels and side steps reward inspection from a lower angle. Roof detailing completes the view from above. On a display shelf, the squared-off silhouette offers an unmistakable G-Class profile among other model cars.
1:43 Diecast Model Cars
1:43 ABT RS6 R 2021 blue
421438190available in stores
ABT RS6 R 2021 - the name alone evokes tuning emotions and stands for uncompromising sporty looks. Solido brings this DNA to the point on a scale of 1:43 and impressively stages the RS6 R in expressive blue. The sporty estate car silhouette meets an aggressively designed front end with a deep spoiler and powerful air intakes, flanked by striking add-on parts on the fenders. Side skirts, a diffuser attachment and a dynamically shaped roof end enhance the appearance, while black multi-spoke wheels emphasize the contrast with the paintwork and visually underline the wide track. The proportions are harmonious, the lines are clean, details such as the contoured skirts, the fine air deflectors and the tinted surfaces are clearly defined and give the miniature sports estate a presence. Thanks to the compact 1:43 scale, the model fits wonderfully in the display case and is also easy to combine - an expressive splash of color for any collection that conveys the character of the 2021 RS6 R at first glance. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from timeless classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alfa Ro Giulia Quad black
421437650available in stores
The Alfa Romeo Giulia Quadrifoglio is considered by many fans to be the epitome of the Italian sports saloon - recognizable by the cloverleaf on the fender. Solido captures precisely this temperament with the Giulia in black on a scale of 1:43. The proportions are sporty and compact, the V-shaped radiator grille and the sharply drawn headlights lend the front end presence. At the sides, finely reproduced lines and the Quadrifoglio logo emphasize the dynamic appearance, while yellow brake callipers behind the dark rims create an attractive contrast. Despite its compact format, the miniature impresses with its clear contours, clean paintwork and harmonious details around the air vents, mirror shells and door gaps. The glazing reveals a carefully crafted interior with clearly visible seats and cockpit structure - an eye-catcher for display cases, desks or the next diorama scene. Anyone who appreciates the Giulia Quadrifoglio will find a striking collector's item here that conveys the essence of the large model on a small scale. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from historic classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alfa Romeo Giulia green
421437950available in stores
Since the 1960s, the name Giulia has been synonymous with sporty saloons with Italian character at Alfa Romeo; the modern interpretation revisits this spirit with sharp lines and a striking front end. This 1:43 scale Solido model brings the design language of the Giulia to life in a vibrant green. The compact miniature features cleanly modeled air intakes, a striking hood contour and the typical V-grille, while side vents and fine sills emphasize the dynamics. Black multi-spoke wheels with visibly backed brake system provide a sporty contrast, while the red accentuated calipers subtly shine through. At the rear, an implied spoiler lip and precisely reproduced lights round off the appearance. A detailed interior with sports seats and structured center console can be seen through the glazing. The richly applied paintwork, clean split lines and precisely placed emblems ensure a harmonious overall appearance that makes its presence felt in every display case. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from classic vintage cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alpina B10 BiTurbo 1994 black
421438220available in stores
In the early 1990s, the Alpina B10 BiTurbo set standards in the world of sports saloons and is still regarded by enthusiasts as one of the fastest four-door icons of its time. Solido honors this chapter with the 1994 version in 1:43 scale and brings the essence of this legend to the point as a compact collector's item. The black paintwork emphasizes the powerful appearance; cleanly traced body lines, the striking front with four round headlights and a sporty front spoiler lend the model excitement and dynamism. The typical green-blue decorative stripes run along the flanks, harmoniously complemented by filigree multi-spoke wheels and a discreetly integrated rear wing. The clear proportions give the saloon silhouette a credible and balanced appearance, while the seat contours and fittings are recognizably indicated in the interior. The result is a harmonious miniature image of the 1994 B10 BiTurbo, which has a real presence on a scale of 1:43 despite its compact size. A charismatic eye-catcher for showcases and desks that brings the fascination of the 90s performance era to life. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alpine A110 Radicale 70 blue 2024
421438321available in stores
The Alpine A110 is a French sports car icon that shone in rallying in the 1960s and early 1970s and won the manufacturers' crown in the new world championship in 1973. With this tradition behind it, Solido reinterprets the modern A110 in the character of the Radicale 70 and brings it into the collection in 1:43 scale. The compact coupé is presented in bright blue 2024 and visually focuses on pure grip: a low front end with visible openings on the hood, finely sculpted side skirts and a fixed rear wing create a dynamic silhouette. Black multi-spoke wheels with a blue accent line emphasize the track look, while the short overhangs and wide cheeks underline the stocky stature of the A110 Radicale 70. The clear contours, harmonious proportions and neatly reproduced details from the front to the rear end are impressive in the small format. Anyone who loves the A110 will find a fresh interpretation for their display case that captures the spirit of the light, active Alpine. Since 1932, Solido has stood for detailed diecast models of iconic vehicles, from timeless classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alpine A110 Radicale 70 red 2024
421438319available in stores
The Alpine A110 embodies the modern reinterpretation of a compact, active sports car; the Radicale 70 version emphasizes this character with a particularly uncompromising appearance. Solido captures precisely this spirit in 1:43 and confidently stages the 2024 version in intense red. The proportions appear harmonious and dynamic, the lines are clearly recognizable and bring the A110 silhouette to the point. At the front, the double lights and taut hood catch the eye, along with a deep-drawn apron with contoured air intakes. At the sides, pronounced sills and a wide stance emphasize the sporty focus, while black wheels with a red ring provide a contrast. At the rear, the spoiler and diffuser dominate the look and give the miniature its racing touch. Finely engraved joints, neatly finished details and the precise impression of the add-on parts create a harmonious overall picture that appeals to collectors and Alpine fans alike. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alpine A110 Radicale 70 white 2024
421438320available in stores
Since the 1960s, the Alpine A110 has been regarded as a French sports car icon and rally heroine; its modern return is a seamless continuation of this history. Solido captures precisely this spirit with the Alpine A110 Radicale 70 from 2024 in 1:43 scale. The compact coupé appears in white paintwork and has a deliberately racetrack-oriented appearance: a striking front splitter, accentuated side skirts, air intakes on the hood and a large rear wing visibly sharpen the silhouette. Dark multi-spoke wheels emphasize the high-contrast look, while the flat front and the curved roof retain the typical A110 lines. The proportions are crisp, while details such as the precise modeling of the air inlets and outlets and the sporty rear section give the Radicale 70 presence in a small format. The result is a piece of modern Alpine DNA for the showcase that appeals to collectors and track fans alike and brings the idea of an uncompromising, active A110 derivative to life. A showpiece with a strong character that makes the connection between tradition and the present visible. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Alpine A110 Radicale orange
421438192available in stores
Since the 1960s, the Alpine A110 has stood for French light-footedness and pure driving pleasure - a sports car name with a lot of history. It is precisely this heritage that Solido is picking up on and realizing the Alpine A110 Radicale in 1:43 scale as a compact showpiece. The model features a striking two-tone look in bright orange with a black hood and black roof, complemented by a large rear wing, dynamic side skirts and dark multi-spoke wheels. Precise proportions, cleanly sculpted edges and realistically rendered lights emphasize the clear lines, while the clearly recognizable air intakes on the front end give the coupé a noticeable motorsport touch. The harmonious gap dimensions and finely crafted details give the characteristic shape of the A110 a credible appearance and ensure presence despite its compact format. This makes the A110 Radicale a colorful eye-catcher for the display case and a beautiful addition to any collection that appreciates modern sports car aesthetics. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Aston Martin DB12 2023 blue
421438224available in stores
Aston Martin DB12 2023 - as a coupé in red, this prototype sums up the elegant lines of the DB family, and Solido translates precisely this appearance into the compact 1:43 world. The miniature shows the sporty, stretched radiator grille, the long hood with striking beading and the flat headlights that blend elegantly into the front. Side air outlets, a powerful shoulder line and the contrasting dark roof emphasize the dynamic silhouette. The filigree multi-spoke wheels and the cleanly contrasting frames of the glazing round off the appearance and make the model look just as present on the shelf as the large original on the road. The 1:43 scale ensures harmonious proportions, fine engravings and a clear representation of details without losing its compact charm. The result is an enthusiastically eye-catching collector's item for all those who appreciate modern British sports car aesthetics. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Aston Martin V V12 grey
421437760available in stores
Aston Martin stands for British sports car culture like almost no other brand, and the designation V12 already signals pure Gran Turismo character in the name. Solido captures precisely this flair with the Aston Martin V V12 in 1:43 scale. In its compact size, the gray coupé displays the elegant proportions and dynamic lines that make this model so appealing: a wide, deep-set radiator grille, a powerfully sculpted hood and slender sides with subtly hinted aerodynamic details. The dark, filigree wheels with yellow brake callipers provide a sporty contrast to the subtly glittering paintwork, while a black front spoiler emphasizes the asphalt-focused appearance. The clear windows reveal a carefully reproduced interior, the body surfaces are cleanly contoured and the gap dimensions and beading appear harmonious and sharply defined. In the popular 1:43 format, this model fits effortlessly into the display case, complements existing series and brings a noble sporting spirit to any collection. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Audi Avant S2 blue
421437990available in stores
Audi Avant S2 in blue - a name that combines sport and everyday life in estate car format. Solido realizes this model as a 1:43 miniature and captures the clear lines of the Avant harmoniously. The proportions of the five-door model come into their own in the compact scale: the long roof line, the side window graphics and the cleanly modelled bumpers form a harmonious silhouette that collectors will immediately recognize. The blue paint gives the model a fresh, lively look, while silver-colored wheels and the discreet roof rails round off the dynamic appearance. The front with finely crafted lights and radiator grille as well as the precisely reproduced bodywork details underline the claim to authenticity in the display case. Inside, the contours of the cockpit can be glimpsed through the clear windows - a harmonious overall picture that gets to the heart of the character of the Audi Avant S2. As a collector-friendly format, the 1:43 Audi cuts a fine figure in any line-up and is a stylish addition to both Audi and classic car themes. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 BMW E36 Coupe M3 1999 blue
421438202available in stores
As the third generation of the BMW M3, the E36 Coupé had a decisive influence on the 1990s and became a true icon in 1999. Solido captures precisely this feeling of the era with the 1:43 scale BMW E36 Coupe M3 1999. The blue two-door model shows the typical proportions of the model series: flat front with striking twin headlights, the narrow double kidney grille and clearly drawn lines along the flanks. M3-specific aprons, subtle widening and a short rear edge emphasize the dynamics, while finely designed wheels and cleanly engraved joints credibly reflect the original. The paintwork has a sporty shimmer, the front apron sits low, the side skirts run precisely - even in this compact format, the silhouette appears cohesive and full of tension. The realistically rendered interior creates a harmonious overall picture that brings the character of the 1999 coupé to life and immediately attracts attention in any display case. A strong addition for collectors of BMW classics and for all those who celebrate the M3 era of the nineties. Since 1932, Solido has stood for detailed diecast models of iconic vehicles from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 BMW G80 M3 2023 blue
421438210available in stores
For decades, the BMW M3 has been regarded as a sporty icon among saloons, and the current G80 generation continues this legacy with its striking design language. It is precisely this presence that Solido brings to the collector's shelf: the BMW G80 M3 2023 appears here as a 1:43 miniature in expressive blue. The long hood with sharp creases, the vertical double kidney grille and the low front apron look energetic even on a compact scale. Side air vents, precisely reproduced headlights and a contrasting black roof emphasize the performance character of the sporty four-door silhouette. At the rear, a diffuser, discreet trunk spoiler and the four tailpipes round off the appearance. Finely detailed multi-spoke wheels with visible red brake callipers and a cleanly designed cockpit behind clear windows demonstrate the attention to detail. The harmonious interplay of strong lines and careful workmanship makes this Solido model an attractive addition to any modern M collection. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic vintage cars to contemporary sports cars.
1:43 Diecast Model Cars
1:43 BMW G81 M3 Touring, 2023 blue
421438215available in stores
BMW G81 M3 Touring, model year 2023: In this 1:43 miniature from Solido, clear lines meet sporty presence. The bold blue accentuates the angular front with the large, vertically emphasized double kidney grille, while the contrasting black roof and dark mirror caps emphasize the dynamic estate car silhouette. Finely sculpted air intakes, pronounced fenders and precisely engraved beading lend depth and sharpness to the appearance. The filigree multi-spoke wheels sit firmly in the wheel arches and emphasize the wide track, which visually anchors the G81 firmly to the road. At the front, narrow headlights and a striking bumper set sporty accents, while the indicated air outlets at the sides provide the typical M look. The proportions are harmoniously implemented, from the long hood to the stretched roofline, and make the compact format a strong showpiece on the shelf. A harmonious, detailed collector's item for all those who like the modern BMW Touring style. Since 1932, Solido has stood for detailed diecast models of iconic vehicles, from classic vintage cars to the latest sports cars.
1:43 Diecast Model Cars
1:43 BMW G81 M3 Touring, 2023 purple
421438214available in stores
With the G81, BMW fulfilled a long-held wish of the M community in 2023: for the first time, the M3 appeared as a standard Touring and combined the dynamics of the icon with the utility value of a sporty estate. It is precisely this mixture that Solido brings to the point in 1:43 scale. The miniature model of the BMW G81 M3 Touring from 2023 is presented in a deep purple, which elegantly emphasizes the clearly modelled surfaces and edges. The striking front with large double kidney grille, the muscular fenders and the stretched estate car silhouette look authentically realized; fine details such as the filigree multi-spoke wheels and black accents on the grille and add-on parts underline the charged appearance. The proportions are harmoniously captured, from the sharply drawn hood to the sporty finish at the rear. In the handy 1:43 format, the M3 Touring is ideal for showcase presentation and adds a piece of current BMW M history to any collection. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic vintage cars to modern sports cars.
1:43 Diecast Model Cars
1:43 BMW G87 M2 2023 white
421438229available in stores
Launched in 2023, the BMW M2 of the G87 series marks the current generation of the compact sports coupé and polarizes with its powerful, angular design language. Solido captures precisely this appearance in 1:43 scale in white and translates it into a harmoniously proportioned miniature. The front has an emphatically dynamic appearance with large openings and clearly drawn edges, while dark accents further sharpen the lines. Black multi-spoke wheels, pronounced side skirts and striking aero details on the wheel arches give the model additional width. An eye-catching rear wing and the contrasting roof emphasize the performance look that makes the G87 so unmistakable. Cleanly reproduced headlights, fine gaps and precise color separation between the body and add-on parts demonstrate the careful implementation, which impressively accentuates the characteristic M2 silhouette on a small scale. The result is a compact showpiece for collectors that convincingly conveys the essence of the 2023 M2. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 BMW M2 G87 Zandvoort 2023 blue
421438233available in stores
The BMW M2 of the G87 series continues the tradition of compact M sports models; the striking Zandvoort Blue paintwork bears the name of the Dutch race track and emphasizes the dynamic character. Solido captures precisely this appearance in 1:43 format: a compact coupé with a wide stance and powerful front end, realized as a detailed miniature vehicle for the display case. The model shows the clearly drawn bumper architecture with large air intakes, the angular hood with dark accents and a contrasting black for the roof, spoiler and mirror caps. Flowing side skirts, cleanly sculpted fender extensions and low-set, black-painted wheel rims with a subtly visible brake system emphasize the sporty lines. The proportions appear harmonious and the engravings are precisely placed so that the light edges and shadows convincingly reproduce the muscular appearance of the prototype. Thanks to the 1:43 scale, the BMW M2 G87 can be effortlessly presented in a space-saving manner without sacrificing presence. An atmospheric collector's item for all those who appreciate modern M aesthetics. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 BMW M5 Competition
421437880available in stores
As the epitome of the sports saloon, the BMW M5 has combined business elegance with motorsport genes for decades - the Competition version sharpens this claim even further. Solido gets to the heart of this DNA on a scale of 1:43 and captures the superior presence of the model series with clear proportions and a fine finish. The model on display features an elegant gray paint finish with a contrasting black roof, dark kidneys and a powerfully sculpted front apron. Striking side inserts, precisely sculpted mirrors and multi-spoke wheels emphasize the dynamic stance and give the M5 Competition a self-confident appearance even in small format. The cleanly finished contours, harmonious gaps and the detailed realization of the bodywork convey the quality of the workmanship, while the lines reveal the mixture of luxury and sportiness of the 5 Series. This Solido model car brings the character of the high-performance sedan into the display case and appeals to collectors and automobile enthusiasts alike. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Brabus Widestar 2022 red
421438219available in stores
Brabus is known among enthusiasts for spectacular interpretations of the G-Class, and the name Widestar stands for the extra-wide appearance. Solido translates this theme impressively into 1:43 scale with the Brabus Widestar 2022 and brings the powerful lines of the original to the point as a compact collector's item. In rich red with black contrasts, the model shows the angular silhouette, the wide wheel arches and a front with strikingly drawn air intakes. Indicated ventilation elements sit on the hood, while a roof spoiler at the rear crowns the clear lines. Large, dark rims with a fine spoke design and red details provide dynamism, while neatly traced protective strips, side exhaust tailpipes and precise engravings add character and depth. Despite the small format, the proportions are harmonious, with cleanly worked washer edges, trim strips and glazing bringing the beefy presence of the Widestar look to life. A charismatic showpiece for the display case that brings modern tuning style to life in a condensed form. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Dodge Chall. Demon red
421437540available in stores
The Dodge Challenger Demon is a particularly extroverted offshoot of the traditional Challenger series and embodies the uncompromising muscle car statement of the modern era. Solido translates this presence into a 1:43 scale model that harmoniously captures the powerful design language of the prototype. The rich red paintwork makes a clear statement with the contrasting black hood, while the wide stance, low front end and striking air intake point to pure performance. Black rims, the massive fender extensions and the rear spoiler create the typical Demon silhouette, which radiates dynamism even when stationary. Finely crafted details such as the grille, air intakes and lights appear cleanly proportioned, while the glazing allows a view into the interior and emphasizes the authentic lines. Thanks to its compact scale, the Challenger Demon can be harmoniously integrated into existing collections and makes just as much of an impression on a desk as it does in a display case. A passionate piece of US car culture in small format, realized by Solido, which has stood for detailed diecast models of iconic vehicles since 1932 - from classic cars to modern sports cars. Warning! Not suitable for children under 14 years.
1:43 Diecast Model Cars
1:43 Dodge Challenger SRT Demon blue
421438010available in stores
In the world of muscle cars, the Dodge Challenger SRT Demon stands for uncompromising performance and a brute appearance - and it is precisely this aura that Solido captures with this miniature model. On a scale of 1:43, the US coupé classic is presented in an intense blue that emphasizes the powerful lines. Wide fenders, the long hood with striking air intake and the low front splitter with yellow accent give the vehicle its unmistakable presence. Black wheels, the stocky side view and a discreet rear spoiler harmoniously round off the dynamic look. The proportions are precise, details such as the double light signature at the front, the finely structured radiator grille and side emblems are neatly finished. The surface has an even and rich appearance, contours and split lines are clearly traced, so that the muscular character of the SRT Demon is impressively accentuated in a small space. Thanks to the 1:43 scale, the model can be easily integrated into existing collections and shows a lot of presence in a small space. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from style-defining classic cars to modern sports cars and track heroes.
1:43 Diecast Model Cars
1:43 Dodge Challenger SRT Demon orange
421438206available in stores
As the most radical manifestation of the modern Dodge Challenger, the SRT Demon became a dragstrip icon - with a look that signals pure muscle power. This 1:43 scale Solido model captures precisely this appearance and translates it into compact collector's scale. The body shines in bright orange, with the contrasting black hood providing a striking contrast. A large, dynamic graphic is emblazoned on the side, clearly visualizing the Demon name. At the front, a deep front splitter with a yellow accent creates a racing feel, while black rims and a discreet rear spoiler emphasize the broad, compact lines of the US coupé. Despite its manageable size, the model features neatly crafted details: precise contours on the front and radiator grille, realistically depicted lights and harmonious proportions of the wide fenders. A detailed cockpit can be seen through the clear glazing, which rounds off the sporty character. Anyone who collects American muscle cars is guaranteed an eye-catching showpiece with a strong character. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from timeless classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Hyundai i30N 2022 blue
421438120available in stores
The Hyundai i30 N brought the brand's performance forge N to the roads of Europe in 2017 and set the benchmark for compact sports cars; the 2022 model noticeably sharpened the appearance once again. Solido captures precisely this character on a scale of 1:43 and turns it into a coveted miniature hot hatch for connoisseurs. The blue paintwork stands in stark contrast to the black roof, the front shows the wide grille with dynamically designed air intakes, and a red line on the spoiler emphasizes the sporty orientation. At the sides, the short overhangs, contoured aprons and dark gray rims, behind which the striking brake system shines through, catch the eye. At the rear, the roof spoiler makes a clear statement, the lights are precisely traced and the mirrors and window frames are finely crafted. As a five-door compact, the i30 N looks sturdy and ready to drive, even in its small format, and the harmonious proportions make the lines of the prototype look authentic. The 1:43 scale makes the model an uncomplicated eye-catcher in any collection. Solido has stood for detailed diecast models of iconic vehicles since 1932, from timeless classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 McLaren 765 LT 2020 grey
421438258available in stores
The McLaren 765 LT from 2020 stands for uncompromising sports car aesthetics. In this 1:43 scale miniature, Solido captures the appearance of the 765 LT in gray with noticeable precision. The extremely flat front, the sharply contoured lights and the deep air intakes give the model an impressive presence. The grey paint tone forms a high-contrast partner to the dark roof and the black aero elements, the side line runs tightly to the rear and emphasizes the dynamic wedge shape. Fine engravings, clean edges and harmonious proportions allow the design of the prototype to shine through clearly. The filigree multi-spoke wheels with a dark finish pick up on the sporty character, while the low vehicle position and the striking rear end visually convey the dynamics. Compact, precise and effective, this 1:43 model presents itself as an expressive piece for the display case or desk and enriches any collection with modern supercar design language. Since 1932, Solido has stood for detailed diecast models of iconic vehicles, from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Mercedes AMG G63 2022 white
421438249available in stores
The 2022 version of the Mercedes-AMG G 63 impressively captures the unmistakable, angular design language of the G-Class. This 1:43 scale Solido model precisely reproduces the prototype in white paintwork and transports the presence of the AMG design into collector's format. The striking front with vertical slats in the radiator grille, the muscular wheel arches and the straight-lined flanks are neatly reproduced. Large, finely structured multi-spoke wheels, side running boards and the characteristic side exhaust trims underline the powerful appearance, while black accents emphasize the clear silhouette. The windows provide a view of a carefully designed interior with visibly crafted seats and cockpit details, lending the Miniature G additional authenticity. Despite its compact dimensions, the car has a presence and, as a modern AMG G 63, blends harmoniously into sophisticated collections. Anyone who appreciates the consistent lines of the model series will receive a detailed statement in 1:43 format that visually captures the character of the 2022 G 63 with pinpoint accuracy. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Mercedes SEC 560 AMG Widebody white
421438241available in stores
Widebody icon of the late 1980s: the Mercedes 560 SEC with AMG widebody shaped an entire era with its sweeping fenders and superior coupé silhouette. This Solido model harmoniously captures the appearance of the large two-door model as a 1:43 miniature in white and confidently implements the characteristic lines of the SEC. The widened wheel arches, the clear front with large star and orange indicators as well as the elongated hood are precisely reproduced and give the model the typical presence of the prototype. Fine engravings on the bumpers and trim strips, cleanly inserted headlights and tail lights as well as sporty-looking wheel rims round off the authentic impression. Thanks to the 1:43 scale, the coupé looks compact without sacrificing detail - a strong appearance for showcases and desks alike. Anyone looking to add legendary AMG flair to their collection will find a charming homage to the large coupé in the Mercedes SEC 560 AMG Widebody from Solido. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from venerable classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Mini Cooper John Works 2023 red
421438207available in stores
Since the 1960s, the name Cooper at Mini has stood for motorsport courage and the close connection to racing car designer John Cooper - a tradition that still characterizes the most dynamic variants today. Solido picks up on this lineage with the Mini Cooper John Works 2023 in 1:43 collector's scale and impressively stages the compact sports car in an energetic red and black combination. The three-door silhouette, the striking air intake on the hood, the powerfully sculpted front apron and neatly sculpted side skirts give the Mini a tangible sense of excitement. Black multi-spoke wheels, a contrasting roof and subtle aero details at the rear round off the resolute appearance. The proportions and lines have been precisely chosen, allowing the temperament of the 2023 John Works to shine through clearly even in the small format. Whether on the desk or in the display case, this model celebrates the agile driving experience and iconic design language of the iconic performance mini in a compact space. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Mini Cooper S 1994 green
421438242available in stores
The Mini Cooper S has been known as a lively performance icon and rally winner since the 1960s; the late model years such as 1994 retained its unmistakable character with compact proportions and striking appearance. It is precisely this spirit that Solido brings into the collection with the Mini Cooper S 1994 in 1:43 scale. The model is painted a rich green with a contrasting white roof and discreet double stripes across the hood. At the front, four additional headlights and the classic, finely ribbed radiator grille characterize the face, while cleanly modeled bumpers and clear lights accurately reflect the design language of the original. Despite the handy format, the implementation impresses with harmonious proportions and lovingly crafted details: flush trim strips, realistic rims with a precise spoke look and transparent glazing that allows a view into the compact interior. The steel green paintwork has an even and lively appearance, while small accents such as mirrors and door handles provide authentic contrasts. Anyone who appreciates the timeless charm of the classic Mini will find a showpiece with a strong character for the display case that makes British driving culture tangible on a small scale. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Mini Cooper Sport nightfire red
421438271available in stores
Since the 1960s, the Mini Cooper has stood for British driving culture with a sporty touch like almost no other car - a compact icon that combines style and motorsport flair. Solido brings precisely this feeling to the collector's shelf with the 1:43 scale Mini Cooper Sport. The model comes in Nightfire Red with a contrasting white roof and classic rally stripes across the hood. At the front, four additional headlights sit in front of the characteristic radiator grille, while chrome-plated details and finely drawn contours all around emphasize the unmistakable appearance of the little Brit. The compact proportions are harmoniously implemented, the lines appear clean and clear, so that the typical Cooper silhouette immediately catches the eye. White rims and reflective trim elements set sporty accents, while the dark glazing draws the eye to a simple, harmoniously coordinated interior. In the handy 1:43 scale, the Mini Cooper Sport is ideal for themed dioramas or as a striking splash of color between classics and modern classics. A charming piece of automotive history in miniature that will make collectors' hearts beat faster. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Nissan 400Z Rocket Bunny purple
421438217available in stores
The Nissan Z series has stood for sporty coupés with clear lines for decades; in the tuning cosmos, the Rocket Bunny design ensures an unmistakable wide-body look. It is precisely this interplay that Solido brings to the point in 1:43 scale: the Nissan 400Z Rocket Bunny in deep purple makes a big statement even in small format. Wide fender extensions, an aggressive front bumper with spoiler lip, side skirts and a striking rear wing form the characteristic silhouette. Golden multi-spoke wheels fill the wheel arches to the brim, while the low road holding exudes a pure track feel. Finely engraved body lines, cleanly contrasting headlights and tail lights as well as precisely implemented details such as visible screw fittings on the extensions demonstrate the careful implementation. Mirrors, window frames and air intakes are also clearly traced, giving the proportions a harmonious appearance and maintaining the presence of the 400Z. Perfect for collectors of modern Japanese sports cars and extroverted style. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Nissan GTR35 2019 blue
421438230available in stores
Solido presents the Nissan GT-R R35 2019 in 1:43 scale and brings the uncompromising line of the Japanese super sports car to the point in miniature format. The compact model features an eye-catching blue and black look: the bodywork shines in blue, contrasted by a black hood and a dark roof. Wide flared fenders, a deep front splitter, striking side skirts and a massive rear wing ensure maximum appearance. The black wheels with sporty tires underline the crouched, racetrack-like appearance. The proportions of the GT-R are harmoniously transferred to 1:43, from the short overhang at the front to the powerful rear section. Clear surfaces, sharp lines and cleanly modeled air intakes result in a harmonious presentation that immediately attracts attention in the display case. As a miniature for collectors, the model focuses on the design language of the 2019 model and showcases it precisely. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Nissan GTR35 2019 pink
421438196available in stores
The Nissan GTR R35 from 2019 stands for a particularly extroverted appearance culture of modern Japanese sports cars - and it is precisely this statement that Solido impressively brings to the point in 1:43 scale. The compact model shows the GTR in vibrant pink and with an uncompromising aero look that looks like speed even when stationary. At the front, the low-slung apron, the striking splitter and the large air intakes catch the eye, while the hood has several air vents. At the sides, flared fenders and wide side skirts emphasize the appearance, while a huge rear wing provides the finishing touch. Matt black wheels with plenty of drop center round off the racing look. Despite the 1:43 scale, the contours, proportions and gaps look harmonious, and the trim lines and logos are clean and sharp. The headlights are clearly designed and the body edges are finely defined, allowing the GTR to confidently show off its presence even in a small format. Thanks to its manageable length, the model is ideal for display cases and as a splash of color in any collection. Since 1932, Solido has stood for detailed diecast models of iconic vehicles, from treasured classic cars to current sports cars - a claim that this GTR visibly carries forward.
1:43 Diecast Model Cars
1:43 Nissan GTR35 2019 white
421438212available in stores
The R35 generation Nissan GT R is regarded by many enthusiasts as a modern icon of Japanese performance culture. In 2019, the coupé presented itself with unmistakable lines and a presence that is equally at home on the road and the racetrack. Solido gets to the heart of this appearance in 1:43 scale. The miniature in white adopts the characteristic front with angular shapes, the compact hood and the muscular flanks. Wide wheel arches, a striking rear wing and sporty add-on parts give the model an uncompromising racing look, while finely engraved details and neatly placed color accents sharpen the silhouette. The compact proportions of the 1:43 format harmoniously capture the balance of power and elegance of the prototype and make the GTR35 2019 an expressive eye-catcher on the shelf. Anyone who appreciates striking design on a small scale will find a harmonious realization of the cult sports car here. Since 1932, Solido has stood for detailed diecast models of iconic vehicles from classic vintage cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Peugeot 306 S16 Noir Onyx
421438278available in stores
The Peugeot 306 S16 represents the sporty, sharpened peak of the 306 model series and is regarded as an icon of the compact performance class of its era. Solido picks up on this flair in 1:43 scale and impressively stages the three-door French car in the color Noir Onyx. The proportions are right down to the last detail: short overhangs, clearly defined flanks and a front end with slim headlights and a striking lion emblem. The cleanly sculpted bumpers, the authentic five-spoke rims and the filigree exterior mirrors convey the characteristic appearance of the S16. The transparent glazing provides a harmonious impression of the interior, while fine engravings on the doors, hood and rear lights emphasize the lines of the prototype. The silky, shiny onyx shade emphasizes the dynamic silhouette and gives the compact sports car a mature appearance, even on a small scale. As a handy 1:43 scale model, the 306 S16 fits confidently into any collection and brings French esprit to the display. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from timeless classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Porsche 964 RS 92 bl
421437580available in stores
In 1992, Porsche presented the 964 RS, a version of the 964 radically trimmed for driving dynamics; the abbreviation RS stands for racing and made this model year a legend among purists. Solido brings this fascination to the desk in 1:43 scale: The Porsche 964 RS 92 appears in intense blue and shows the clear, timeless lines of the air-cooled 964. The flat front with round headlights, strikingly drawn bumpers and the powerfully flared fenders give the coupé the typical RS attitude. Finely crafted details such as neatly engraved door joints, filigree mirrors and carefully modeled lights underline the harmonious proportions and the sporty, down-to-earth appearance. The five-spoke wheels and precise gap dimensions round off the authentic look and make the miniature vehicle an elegant eye-catcher in any display case. The paintwork looks rich and even, edges and contours are clearly defined - a convincing model for collectors who like attention to detail. Anyone looking for the essence of the 964 RS will find it here in concentrated form. Solido has stood for detailed diecast models of iconic vehicles, from classic cars to modern sports cars, since 1932.
1:43 Diecast Model Cars
1:43 Porsche 964 RS Clubsport green
421437970available in stores
The Porsche 964 RS Clubsport from the 911 family enjoys an almost mythical reputation among sports car fans - uncompromising, puristic, completely geared towards driving dynamics. Solido conveys precisely this feeling with the Porsche 964 RS Clubsport on a scale of 1:43. In bright green, the model harmoniously showcases the iconic 964 silhouette with its clear round headlights, contoured bumpers and elegant roofline. The proportions appear balanced, the body edges are cleanly reproduced and the silver rims emphasize the sporty appearance. Through the glazing, the eye is drawn to a dark cockpit with hinted dashboard and seats, which skillfully picks up on the character of the Clubsport version. The compact 1:43 scale version makes the classic an attractive showpiece for the display case or diorama without losing any of its presence. Collectors appreciate the harmonious paintwork, the precise implementation of the typical 964 details and the authentic choice of colors, which gives the model a fresh dynamic. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from historic classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Porsche 965 RS 92 red
421437590available in stores
The Porsche 964 RS 92 evokes memories of the trenchant sportiness of the early nineties and is one of the most striking variants of the 911 model series. Solido translates this character into a compact collector's item on a scale of 1:43, painted in a vibrant red that wonderfully emphasizes the curved fenders and classic lines. Even the first glance at the round front lights, the flat hood and the squat rear reveals the typical 964 silhouette, while the subtle lowering and the contemporary rims lend the model noticeable dynamism. The clear windows allow the dashboard and seat contours to be recognized, giving the miniature vehicle an authentic impression despite its compact size. The proportions and gaps are harmoniously implemented, the paint edges are cleanly finished and the details at the front and rear are precisely worked out. The 964 RS 92 is therefore not only an eye-catcher in the display case, but also transports the essence of an analog sports car into the world of collectors. Solido has stood for detailed diecast models of iconic vehicles since 1932 - from legendary classics to modern sports cars.
1:43 Diecast Model Cars
1:43 Porsche GT3 Touring red
421438193available in stores
Purist understatement instead of big wings: as a touring version of the Porsche 911 GT3, this role model focuses on a discreet, driver-oriented line. Solido captures precisely this character on a scale of 1:43 and translates the clear 911 silhouette into a compact miniature with harmonious proportions. The red paintwork emphasizes the flowing contours over the fenders and doors, while the silver multi-spoke rims and the flush glazing round off the sporty, elegant appearance. At the front, the contoured apron and the strikingly designed air intakes catch the eye, while at the rear, the sleek rear end without a fixed spoiler creates the typical Touring look. Finely defined lines, cleanly placed gaps and a uniform surface quality give the model a collector's presence in a small space. Anyone who appreciates the GT3 Touring will discover the special blend of restraint and dynamism that makes this 911 so appealing - as a miniature with a love of detail that credibly captures the spirit of its great role model. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Porsche GT3 Touring silver
421438194available in stores
Understatement is a tradition at Porsche: the touring version of the GT3 dispenses with the large rear wing and brings its racetrack genes to the road with a discreet look. Solido captures precisely this concept with the Porsche GT3 Touring in silver on a scale of 1:43. The miniature emphasizes the flat front with wide air intakes, the flowing roofline and the tidy rear with centrally positioned tailpipes. Precisely engraved gaps, clearly modeled lights and filigree wheels show attention to detail, while the shimmering metallic paintwork elegantly highlights the striking contours. The 1:43 scale brings out balanced proportions in a compact space and makes the typical Touring features, such as the absence of the large wing and the purist appearance, immediately apparent. Whether as an introduction to the world of modern Porsche models or as a targeted accent in an existing collection: this GT3 Touring impresses with its authentic design and clean realization in a small format. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Shelby Mustang GT500 2020 purple
421438199available in stores
The 2020 Shelby Mustang GT500 stands for modern US performance in its purest form - and Solido translates this appearance into a 1:43 scale miniature with great presence. The coupé comes in a rich purple with two white vertical stripes running from the front over the hood to the rear. The front apron with its large air intake, honeycomb grille and the striking snake in the emblem looks resolute, while the hood has striking vents. Shaped sills at the sides emphasize the muscular lines, while black multi-spoke wheels with red brake callipers set sporty accents. At the rear, a wide wing crowns the fastback-like profile and is accompanied by a deep diffuser - a look that immediately sounds like the road and racetrack, even on a small scale. The proportions are harmoniously reproduced, the paint separation edges of the stripes clean and the contours clearly modeled, which captures the dynamic silhouette of the GT500 credibly. Compact in 1:43, but with a strong charisma, this model makes every display case come alive. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from timeless classics to modern sports cars.
1:43 Diecast Model Cars
1:43 Toyota Corolla GR Circuit Edition
421438279available in stores
With the Toyota Corolla GR Circuit on a scale of 1:43, Solido brings the dynamic GR interpretation of the Corolla model series into a compact collector's format. The model on display appears in fresh blue and sets clear sports accents with a contrasting black roof, striking air intakes on the hood and powerfully shaped fenders. At the front, the sharply drawn lines stretch across the bumpers, while at the rear the clearly pronounced rear spoiler creates a striking silhouette. Black rims emphasize the track look and round off the exciting appearance. In typical Solido fashion, the miniature features a cleanly finished body, harmonious proportions and clearly defined details, so that the character of the GR Circuit comes across convincingly even on a small scale. As a 1:43 model, it is ideal for the display case, the desk or as a sporty splash of color in existing collections that appreciate modern compact sports cars. Anyone who loves the mix of striking looks and precise realization will find an attractive new addition here. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Toyota GR Yaris
421437850available in stores
The Toyota GR Yaris is regarded by sports car fans as an uncompromising hot hatch with motorsport genes and a striking three-door appearance. Solido captures precisely this temperament in a compact 1:43 scale model that harmoniously brings the dynamic lines of the original to the desk or shelf. The deep black paintwork emphasizes the compact silhouette, short overhangs and muscularly shaped flanks. At the front, the powerful front apron with large air intake ensures presence, while the delicate, black-painted multi-spoke wheels set accents at the sides, behind which red brake callipers provide sporty details. The appearance at the rear also remains cohesive: clear edges, a wide stance and a compact roof profile that focuses on agility. Despite the small scale, the proportions and subtleties are clearly shown to advantage, from the flush glazing to the discreetly engraved body joints. The result is a harmonious miniature portrait of the GR Yaris that will appeal to collectors and driving dynamics enthusiasts alike. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Toyota Supra MKIV red
421437570available in stores
The fourth generation of the Toyota Supra, known internally as the A80 and as the MKIV, was launched in 1993 and shaped an entire sports car era with its flowing aerodynamics, long hood and striking rear wing. Solido captures precisely this appearance on a scale of 1:43 and translates it into a harmonious miniature for real enthusiasts. The bright red paintwork emphasizes the sleek contours of the front, the gently curved fenders and the muscular side line. Characteristic details such as the oval headlights, the side air intake and the large rear spoiler give the miniature its unmistakable MKIV silhouette. The near-standard rims in five-spoke design, neatly engraved joints and finely crafted mirrors and door handles show attention to detail. Thanks to the dark interior with clearly recognizable seats and center console, the interior looks just as authentic as the exterior. The result is a compact collector's item that conveys the Supra DNA with a lot of presence in a small space and radiates sporty splendor in every display case. Since 1932, Solido has stood for detailed diecast models of iconic vehicles, from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 Volkswagen Golf MKI 1992 black
421438227available in stores
The Volkswagen Golf MKI from 1992 stands for the clear, timeless design language of its era and marks a chapter that continues to inspire collectors to this day. Solido takes up this icon in 1:43 scale and transforms it into an elegant convertible in deep black. Even the first glance reveals the typical proportions with the angular front, the four round headlights and the cleanly modeled bumpers. The multi-spoke wheels, finely indicated trim strips and the open soft top with visible folds lend the miniature Golf an authentic character. In the interior, the seats, steering wheel and dashboard are realistically reproduced and harmonize with the precise body engraving. The clear windows provide a clear view of the dark interior, while discreet prints on the indicators and lights emphasize the lines. As a Solido Volkswagen Golf MKI Cabrio 1:43, the miniature impresses with its harmonious proportions and uniform paintwork, which emphasizes the contoured hood and the characteristic side flanks. An atmospheric piece of automotive history for display cases, desks or dioramas. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
1:43 VW Caddy Pick up white
421437620available in stores
Practical, straightforward, appealing: Solido captures the character of a compact commercial vehicle in 1:43 scale with the VW Caddy pick-up in white. The model features a harmonious combination of single cab and spacious loading area, plus an angular front with round headlights and black bumper - precisely the clear design language that makes pick-ups of this type so distinctive. Fine body engravings with neatly indicated joints, a thin side strip and precisely crafted door handles emphasize the lines. The sleek steel rims with true-to-scale tires give the Caddy an authentic stance, while glazed windows provide a view of a reduced interior. Details such as mirrors, windshield wipers and the flat rear end of the flatbed are also harmoniously implemented and ensure a harmonious overall effect. The uniform white paintwork underlines the functional elegance and effectively highlights the proportions of the pick-up. Thanks to the 1:43 scale, the model fits seamlessly into collections and, as a compact showpiece, brings the appeal of simple, functional vehicle concepts to the fore. Since 1932, Solido has stood for detailed diecast models of iconic vehicles - from classic cars to modern sports cars.
1:43 Diecast Model Cars
Aston Martin Vantage V12, Die-Cast Model, 1:43
421438276available in stores
Red bodywork and black upper panels make the Aston Martin Vantage V12 Scorpus stand out in a collection of road-car replicas. Viewed from the front corner, its wide horizontal-slat grille sits beneath slim headlights. The glossy finish catches the light across the sculpted body, while tinted windows contrast with the surrounding paint. Side mirrors add another detail to inspect along the profile. This die-cast metal miniature depicts the 2023 subject at 1:43 scale. Its black multi-spoke wheels, front splitter and large rear spoiler give enthusiasts plenty to examine during a close look. A shelf display leaves the low coupe shape in view, with the flared front-wheel elements visible from an angled position.
1:43 Diecast Model Cars
Audi Coupe S2 1994, Die-Cast Model Car, 1:43
421438257available in stores
A metallic green finish follows the Audi Coupe S2 1994's body lines, while the rear spoiler gives the silhouette its sporting character. The die-cast metal miniature depicts the 2-door subject at 1:43 scale. Black window frames outline the glazing, and side mirrors add detail worth examining from a front-quarter view. A roof antenna rises above the coupe, a small feature visible when the replica is displayed below eye level. The front plate carries the subject's name, complementing the markings on the grille. Viewed side-on, the silver wheels contrast with the darker trim beneath the doors. For an Audi collection, this representation offers a 1994 subject whose shape can be appreciated from several angles. The included contents comprise the model car and a manual.
1:43 Diecast Model Cars
Audi RS2, Die-Cast Model Car, 1:43
421438231available in stores
The black Audi RS2 pairs a long wagon roof with a low, sporty front, a shape worth viewing from more than one angle. Its glossy finish catches the light along the bonnet and flanks. Reproduced in die-cast metal at 1:43, the miniature suits a collection of compact automobile replicas. The black grille carries an RS badge, while bumper vents give the nose further definition. Door handles punctuate the sides, and the rear light cluster rewards a view from behind. Against the dark paintwork, the silver wheels provide a bright contrast for shelf photography. The roof fittings and window tint remain visible in a three-quarter view, inviting a closer look at the estate's proportions.
1:43 Diecast Model Cars
Audi S2 Coupe, Die-Cast Model Car, 1:43
421437200available in stores
The Audi S2 Coupe’s rear spoiler gives this 1993 subject its distinctive silhouette, ready to be appreciated from a rear three-quarter angle. White die-cast metal bodywork contrasts with the black lower bumper and trim. At 1:43 scale, the model offers a compact representation for an automobile collection. A roof antenna and side mirrors add recognisable exterior details above and beside the cabin. Windscreen and rear-window wipers reward a closer inspection of the glazing, with the front seats visible inside. Clear headlights and orange indicators distinguish the nose, while the rear lamps show separate red and amber sections. The silver wheels and Audi grille markings invite comparison with the coupe’s full-size appearance. A shelf arrangement that leaves space around the model lets enthusiasts appreciate its front, side and rear styling.
1:43 Diecast Model Cars
BMW E46 M3, Die-Cast Coupe, 1:43
421438313available in stores
Phoenix yellow catches the eye on this BMW E46 M3, a coupe whose colour earns a place at the front of a display. Against a dark shelf backdrop, the finish offers a striking contrast for a closer look at the miniature. The model depicts the 2000 car in die-cast metal at 1:43 scale. Its compact proportions invite comparisons with other automotive replicas in a cabinet arranged by marque or period. For an enthusiast assembling a BMW collection, this subject offers a specific model and year to place within the lineup.
1:43 Diecast Model Cars
BMW G82 M4 Competition, Die-Cast Car, 1:43
421438245available in stores
Green bodywork makes this BMW G82 M4 Competition a splash of colour on a collector’s shelf. The miniature depicts the 2023 vehicle, a specific subject for a collection centred on the marque. Its die-cast metal construction gives enthusiasts a material detail to appreciate when examining the replica. At 1:43 scale, it lends itself to a compact arrangement of contemporary automobiles. A display devoted to BMW offers a setting for comparing the depicted subject with other vehicles in the collection. The included contents are the model car and a manual.
1:43 Diecast Model Cars
BMW M2 G87, Die-Cast Model Car, 1:43
421438234available in stores
Toronto red sets off the widebody shape of the BMW M2 G87, making its flared silhouette worth a closer look on the shelf. The miniature depicts the 2023 vehicle with a low stance and a sporty front bumper. Its die-cast metal body gives the replica a material character that collectors can appreciate when examining the exterior. At 1:43, the coupe fits into a compact display devoted to contemporary automobile design. Black wheels echo the roof, and tinted windows carry the darker accents across the upper body. The kidney grille and hood badge identify the marque at the nose. A front splitter, side skirts and rear wing give enthusiasts aerodynamic features to inspect from different angles. Beside other scale replicas, this red coupe invites comparisons of proportions, body shapes and styling choices.
1:43 Diecast Model Cars
Dutsun 240Z Rocket Bunny, Die-Cast Car, 1:43
421438253available in stores
The Dutsun 240Z Rocket Bunny wears its widebody styling in white, with a low nose and a rear wing that stand out on a display shelf. Viewed from above, the flared fenders show how far the body extends around the wheels. This die-cast metal miniature depicts the 1973 subject at 1:43 scale. Its black deep-dish rims reward a closer look beneath the arches. Hood-mounted mirrors place another distinctive detail forward of the windscreen, while round headlights define the front of the coupe. Through the windows, the interior invites inspection beyond the exterior bodywork. Windshield wipers add a further point to notice on the glazing. For a tuning-themed display, the sculpted silhouette offers a contrast to standard-bodied automobile replicas. A model car and manual are included.
1:43 Diecast Model Cars
Dutsun 240Z Rocket Bunny, Die-Cast Car, 1:43
421438254available in stores
The Dutsun 240Z Rocket Bunny wears its custom styling across a long-hood silhouette, with a rear spoiler completing the profile. On a display shelf, the red finish draws attention to the sculpted bodywork. The die-cast metal model depicts the 1973 subject at 1:43 scale. Round headlights sit beside a black front grille, giving the nose a distinct face when viewed head-on. Hood-mounted mirrors add another detail to inspect from a front three-quarter angle. The wide fenders and dark wheels invite a closer look at the contrast between the classic coupe shape and its tuner styling. Collectors can position the miniature at an angle to show the nose, side profile and spoiler together. A manual is included with the model car.
1:43 Diecast Model Cars
Honda Civic Type R, Die-Cast Model Car, 1:43
421438110available in stores
The white Honda Civic Type R wears a rear spoiler above its hatchback body, an outline worth viewing from behind as well as alongside. Black exterior accents stand out against the paintwork on this representation of the 2022 vehicle. At the front, a black grille sits beneath slim headlights, while a hood vent adds another feature to examine up close. Tinted windows continue the dark detailing around the cabin. Red brake calipers are visible behind the multi-spoke wheels, rewarding a closer look at the running gear. Honda badges appear on the grille and wheel centers, and the front plate area carries CMC and TYPE R lettering. The die-cast metal model is made in 1:43 scale and comes with a manual. On a collector’s shelf, a three-quarter view shows the nose and flank together; a rear-facing position reveals the diffuser styling beneath the tail.
1:43 Diecast Model Cars
Hyundai i30N, Die-Cast Model Car, 1:43
421438130available in stores
The black grille and slim headlights give the Hyundai i30N a purposeful front view, with the Hyundai emblem visible at its centre. The front plate area carries the i30 N marking, a detail to notice when studying the miniature on a display shelf. This die-cast metal reproduction depicts the 2022 vehicle at 1:43 scale. Along the sides, the door handles and silver detailing on the mirrors reward a closer inspection. A shark-fin antenna sits above the rear of the roof. The hatchback invites display at a slight angle, where its nose and side profile can be appreciated together. Included are the model car and a manual.
1:43 Diecast Model Cars
MB 300CE 6.0 AMG, Die-Cast Model Car, 1:43
421438308available in stores
The widebody MB 300CE 6.0 AMG “THE HAMMER” has a silhouette worth viewing from several angles on a display shelf. Its black finish lets the outline of the coupe carry the visual impact. Depicting the 1988 vehicle, this die-cast metal miniature offers collectors a specific subject for a collection of period automobiles. At 1:43, it invites close inspection in a compact format. A cabinet arranged around AMG subjects or late-1980s motoring gives this replica a fitting setting, with its widened bodywork providing the distinguishing feature.
1:43 Diecast Model Cars
MB 300CE 6.0 AMG, Die-Cast Model Car, 1:43
421438309available in stores
The Hammer widebody gives this red MB 300CE 6.0 AMG a silhouette worth viewing from several angles. On a display shelf, its widened outline invites a closer look at the coupe's proportions. The die-cast metal replica depicts the 1988 vehicle at 1:43 scale. Collectors can place it among other miniatures of the same scale to compare their shapes, or give this subject a display of its own. Its appeal rests on a specific combination: the named AMG subject, the period represented and the broad bodywork.
1:43 Diecast Model Cars
Nissan 400Z Rocket Bunny 2022, Model Car, 1:43
421438216available in stores
The Nissan 400Z Rocket Bunny 2022 wears its widened body low over gold wheels, with a large rear wing rising above the roofline. On a display shelf, that outline gives collectors plenty to examine beyond the familiar sports car shape. The front splitter projects beneath the nose, while side skirts continue the body kit along the lower edges. Viewed from the front corner, the flared fenders show how far the customized body extends around the wheels. A black roof breaks up the red finish across the upper body. Racing-style markings cover the side panels, with a bunny graphic tucked into the lower door area. This die-cast metal miniature represents the car at 1:43 scale and includes a manual. Its tuning theme invites a place beside other customized vehicles, where collectors can compare body kits, wheel finishes and wing designs.
1:43 Diecast Model Cars
Nissan GT-R (R35), Die-Cast Model Car, 1:43
421437640available in stores
The Nissan GT-R (R35) wears a bright green Liberty Walk body kit, with a broad stance that catches the eye on a display shelf. Its oversized rear wing rises above the roofline, making the modified profile worth viewing from the side as well as the front. At 1:43, the die-cast metal miniature offers a compact subject for a collection of Japanese sports cars. The front grille carries the GT-R badge, a detail to spot beneath the vented hood. Dark glazing sits above the flared arches, while low-profile tires leave the black wheel spokes clearly visible. Lettering along the side skirts adds another point of interest when the replica is displayed at an angle. The glossy finish catches the light across the widened bodywork. Collectors can place this coupe among other tuner subjects, where its low nose and tall spoiler give it a distinct outline.
1:43 Diecast Model Cars
Porsche 718 Cayman GT4 RS, Die-Cast Car, 1:43
421438302available in stores
Acid green makes this Porsche 718 Cayman GT4 RS stand out on a display shelf, where its colour rewards a closer look. The miniature depicts the 2024 vehicle with the Weissach package, a specific subject for a collection centred on this marque. Its die-cast metal body is reproduced at 1:43 scale. A collector might place it beside other interpretations of the same subject to compare specifications and finishes. Against a row of subdued paint colours, this green coupe offers a vivid accent. It also invites a display devoted to contemporary sports cars, with the named version taking its place among the collector's chosen examples.
1:43 Diecast Model Cars
Porsche 718 Cayman GT4 RS, Die-Cast Car, 1:43
421438303available in stores
Gulf blue sets the Porsche 718 Cayman GT4 RS apart on a display shelf, where its low coupe shape can be viewed from different angles. This miniature depicts the 2024 vehicle, offering collectors a contemporary Porsche subject to place beside earlier designs. The die-cast metal body gives the replica a tangible material detail to appreciate during close inspection. At 1:43, it suits a collection arranged around compact reproductions of real automobiles. Its named RS subject invites a display centred on sporting Porsche variants, while the blue finish offers a colour contrast beside other replicas.
1:43 Diecast Model Cars – Compact, Detailed, and Perfect for Collectors
1:43 diecast model cars are among the most popular scales in the world of collecting, and for good reason. This scale combines realistic proportions, high-quality craftsmanship, and space-saving practicality, allowing you to expand your collection without needing large display areas. Solido has helped shape the 1:43 scale for decades, proving just how precise and authentic diecast miniature models can be.
Why the 1:43 Scale Is So Popular
The 1:43 scale offers an outstanding balance between detail and compact size. The vehicles look realistic because body lines, proportions, and paint finishes are carefully recreated while still remaining small enough to display multiple models easily in a showcase or on a shelf. That makes this scale ideal for both smaller collections and large themed displays. Another major advantage is value for money. Many collectors purchase new 1:43 releases more frequently because the scale delivers impressive visual quality without requiring excessive space or a large budget.
Solido Quality in a Compact Scale
For nearly 90 years, Solido has represented tradition, craftsmanship, and attention to detail in the diecast world. Even in 1:43 scale, the brand remains committed to durable metal construction, clean graphics application, and authentic vehicle design.
Collectors especially appreciate:
- Realistic body proportions
- High-quality paint finishes and precise printed details
- Brand-specific elements such as wheels, logos, and interior colors
- Durable everyday construction
- Officially licensed recreations of real vehicles
The result is a cohesive diecast model that fits naturally into existing collections while continuing to offer fresh highlights for collectors.
Vehicle Variety for Every Type of Collection
The 1:43 category includes vehicles from many different automotive worlds. Without ever changing scale, collectors can explore entirely different themes, including:
- Street cars and modern performance vehicles
- Vintage cars and automotive classics
- Tuning builds and special editions
This makes it easy to create themed displays, manufacturer-focused collections, or era-specific showcases while keeping everything visually consistent and compact.
Colors, Brands & Styles for Every Taste
One of the biggest strengths of Solido 1:43 diecast model cars is their enormous visual diversity. You’ll find models in virtually every style imaginable – from understated factory paint finishes to bold racing liveries and aggressive tuning-inspired designs. The category includes popular automotive brands such as BMW, McLaren, Mercedes-Benz, Mini, Nissan, Renault, and Volkswagen. Specialty manufacturers like ABT and Koenigsegg add even more excitement for collectors looking for something unique and performance-focused. Whether you prefer road cars or race cars, there’s a model here to match almost any collecting style.
Who Are 1:43 Diecast Models Made For?
The 1:43 scale appeals to a wide range of collectors – from beginners to longtime enthusiasts. Its compact size makes collecting accessible even when display space is limited, while the visual quality and craftsmanship still satisfy experienced collectors. Thanks to their durable construction, many models also work extremely well as gifts for older kids who are beginning their first diecast collection but still want authentic diecast quality rather than toy-like replicas.
Explore More Solido Scales
Once you’ve discovered your favorite vehicles in 1:43 scale, it’s also worth exploring additional Solido categories and sizes:
This allows collectors to expand their collections with entirely different types of vehicles or even display the same favorite car in multiple scales side by side.
Big Collecting Fun in a Compact Scale
1:43 diecast model cars are perfect for collectors who appreciate variety, realism, and efficient use of space. In this scale, Solido combines tradition, quality, and automotive passion into a lineup that continues to appeal to collectors around the world. Whether you’re starting your very first collection or adding new highlights to an existing display, you’ll find models here that deliver long-term enjoyment while reflecting your own personal automotive taste. Start exploring and discover your next favorite model.